Microplate Sealing Films and Tapes
Alkali Scientific VaporSeal™ Titan™ Microplate Sealing Starter Kit, Titan Dispenser + 2 Rolls of VaporSeal, 50 Sheets/Roll, Sterile
The dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Environmentally friendly; no paper liner to remove and discard; utilizes approximately 59% less material than AeraSeal sheeted film. Each sheet is separated by an adhesive-free, perforated, color-coded red band. The smooth lower surface of the dispenser can be used to seal the film to the plate. Dispenser protects unused seals from contamination. Lower support prop prevents dispensing bill from contacting surfaces to prevent contamination. Replacement rolls can be easily installed by releasing the locking clasps on the dispenser.
Electron Microscopy Sciences PCRSeal™ PCRSeal Microplate Sealing Film, PRC, qPCR, -70°C to 100°C
Pre-cut adhesive films for micropalte sealing eliminate well-to-well contamination, microbial and viral contamination, evaporation (excluding breathable membranes) and sample spillage. The pre-cut adhesive films fit all microplates and are sterilized by gamma irradiation and free of cytotoxins. Two scored end-tabs make film positioning and removal hassle-free. Pierceable sealing films facilitate easy removal of samples with a pipet tip. PCRSeal™ has a high optical quality, minimal autofluorescence and resists DMSO and organic solvents. It is RNase and DNase free.
Use: PRC, qPCR
Range: -70°C to 100°C
Thickness: 2 mil
Material: Polyester
Size: 6" x 3.25"
Alkali Scientific ThermaSeal™, Optically Clear Sealing Film, 100/pk
ThermaSeal RTS™ Optically Clear, Silicone Adhesive provides an extremely strong seal to minimize evaporation. The silicone adhesive is non-tacky until pressure is applied to the sealing surface which then creates a secure bond around the wells and perimeter of the plate. Also ideal for dry samples (e.g. soil, seeds, insects, etc.) because the non-activated adhesive above the wells remains non-tacky. A roller or sealing paddle is highly recommended for use with this product to ensure consistent and adequate pressure is applied during the sealing process. Certified DNase- & RNase- free.
Cole-Parmer Excel Scientific PDL-5 Film-Sealing Paddle, Polyethylene, 3-7/8" x 2-15/16", White, 50/cs
Ensure a secured seal of your sealing film with these accessories.
Labsource Inc Clear Weld Heat Seal Mark 2, Permanent Heat Seal, Optically Clear Polymer Film, 500 m x 115 mm
The Clear Weld Heat Seal Mark 2 is an optically clear, permanent sealing film specifically designed for scientific applications. It offers robust protection for polypropylene plates and ensures maximum seal integrity, making it ideal for critical assays such as PCR and qPCR. With dimensions of 500 m x 115 mm, it is autoclavable and resistant to solvents, ensuring reliability for both low-temperature storage and high-temperature incubations.
Analytical Sales & Services 2mil Blue Framed, 384 Square Well Pattern, Ultra Thin, PTFE Adhesive Sealing Film, 0.002 In.
2mil Blue Framed, 384 Square Well Pattern, Ultra Thin, PTFE Adhesive Sealing Film, 0.002 in.
Thomas Scientific Gas Permeable Clear Heat Seal; clear heat sealing film, with 3 mm slits for gas transfer, 100 sheets (125 x 78 mm)
Peelable heat sealing film, optically clear; suitable for qPCR and optical applications Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Heat Seal is an optically clear laminate film forming a peelable seal to polypropylene, polyethylene, polystyrene, polycarbonate and cyclic olefin copolymer (COC) plates. Samples can also be accessed by pre-piercing with a blade, needle or our Pierce Plate (4ti-0398). The optical clarity of this seal enables its use for sealing plates required for imaging use, including fluorescent detection methods such as qPCR and colorimetric assays. The Clear Heat Seal forms a complete seal to a plate enabling both low temperature uses, including low temperature storage, and high temperature uses, such as PCR (when used with a pressurised heated lid). This seal demonstrates moderate solvent resistance and can be utilised for short term compound storage at room temperat
Sigma Aldrich Fine Chemicals Biosciences SIGMA ALDRICH FINE CHEMICALS BIOSCIENCES
NC4042919 FREE ZONE SEALING FILM
Pacer Global LLC Breathable Plate Seals, Pierceable, Self-Adhesive Film, Sterile, 100/PK - MLS-SBPS-100
Breathable Plate Seals, Pierceable, Self-Adhesive Film, Sterile, 100/PK
Pacer Global LLC Crystal Clear Plate Seals for QPCR and PCR, Pressure Sensitive, Sterile, 100/PK
Crystal Clear Plate Seals for QPCR and PCR, Pressure Sensitive, Sterile, 100 per pack
Scientific Specialties Service Inc TEFLON SEALING TAPE 3/4X180'
This item has a minimum qty of 4 per supplier requirements.
Nacalai USA Inc PLATE SEAL EPS 1 BOX
Easy Piercing Seal (EPS) from BioChromato punctures easily to prevent needle clogging. In addition, no adhesive residues are left on the plate or injector needle. The EPS plate seal is highly resistant to organic solvents.
Alkali Scientific SilverSeal II™ Aluminum Sealing Film, Sterile, 50/pk
Compared to other aluminum foils, Aluminum Foil Sealing Film has less tendency to roll back on itself when removing the backing paper. Certified DNase- and RNase- free. Excellent chemical resistance (e.g. DMSO). Excellent chemical resistance (e.g. DMSO). 1.4mil conformable aluminum foil allows visual verification of the seal’s security around each well. End-tab removal before thermal cycling is highly recommended. End-tab removal before thermal cycling is highly recommended.
Research Products International Corp Thermal Seal MiniStrips, Non-Sterile, 200 per Package
ThermalSeal MiniStrips provide a quick and cost effective method for selectively sealing one or two 8-well rows when using PCR plates for small runs. Made of resistant polypropylene film with a strong adhesive for firm bonding to plates.
Adhesive films are specially designed for use as microplate covers. Prevent sample evaporation and contamination in sensitive PCR applications. RNase/DNase free. It is thermostable and functional from -40°C to +120°C at 75% humidity.
Strips measure 19.0 x 103.2 mm, including two removable positioning tabs. Length without tabs is 82.6 mm.
ThermalSeal is a Trademark of Excel Scientific, Inc.